Ascent’s XFP-LP-4955-80 module is compliant with the 10G Small Form-Factor Pluggable (XFP) Multi-Source Agreement (MSA), supporting data-rate of 9.953 to 11.1Gbps, and transmission distance up to 80km on SMF. The transceiver module comprises a transmitter with 1490nm Cooled EML laser and a receiver with an APD photodiode. Transmitter and receiver are separate within a wide temperature range and offers optimum heat consumption and excellent electromagnetic shielding thus enabling high port densities for 10 GbE systems. The metal housing ensures low EMI interference standards, with connector retainer. 10GBASE‐ZR/ZW 10G Ethernet, SONET OC‐192/SDH, SDH STM I‐64.1, 10G Fiber Channel
· Supports 9.953Gb/s to 11.1 Gb/s bit rates
· Hot-pluggable XFP footprint, Built-in digital diagnose
· Maximum link length of 80km with SMF
· 1490nm(1550nm) Cooled EML laser and APD photodiode
· XFP MSA package with single LC connector
· No reference clock required
· Single +3.3V power supply
· Power consumption<2.5W
· Compatible with RoHS
· Temperature range:0 to +70°C
Parameter | Symbol | Min. | Max. | Unit | Note |
Supply Voltage | Vcc | -0.5 | 4.5 | V | |
Storage Temperature | Ts | -40 | +85 | °C | |
Operating Humidity | - | 5 | 85 | % |
Recommended Operating Conditions
Parameter | Symbol | Min. | Typ. | Max. | Unit | Note | |
Operating Case Temperature | Tc | 0 | +70 | °C | |||
Power Supply voltage @3.3V | Vcc | 3.135 | 3.30 | 3.465 | V | ||
Power Supply Current | Icc | 750 | mA | ||||
Data Rate | 9.953 | 11.1 | Gbps |
Optical and Electrical Characteristics
Parameter | Symbol | Min. | Typ. | Max. | Unit | Note | |
Transmitter | |||||||
Centre Wavelength | λc | 1480 | 1490 | 1500 | nm | ||
1540 | 1550 | 1560 | |||||
Spectral Width (-20dB) | Δλ | 1 | nm | ||||
Side-Mode Suppression Ratio | SMSR | 30 | dB | ||||
Average Output Power | Pout | 0 | +5 | dBm | |||
Extinction Ratio | ER | 8.2 | dB | ||||
Data Input Swing Differential | Vin | 180 | 950 | mV | |||
Input Differential Impedance | Zin | 90 | 100 | 110 | Q | ||
TX Disable | Disable | 2.0 | Vcc | V | |||
Enable | 0 | 0.8 | V | ||||
Receiver | |||||||
Centre Wavelength | λc | 1540 | 1550 | 1560 | nm | ||
1480 | 1490 | 1500 | |||||
Receiver Sensitivity | -23 | dBm | |||||
Receiver Overload | -8.0 | dBm | |||||
LOS De-Assert | LOSD | -24 | dBm | ||||
LOS Assert | LOSA | -35 | dBm | ||||
LOS Hysteresis | 0.5 | 4 | dB | ||||
Data Output Swing Differential | Vout | 400 | 600 | 800 | mV | 2 | |
LOS | High | 2.0 | Vcc | V | |||
Low | 0.8 | V |
Notes:
1. The optical power is launched into SMF.
2. Internally AC-coupled.
3. Measured with a PRBS 231-1 test pattern @9953Mbps, BER ≤ 1 × 10-12.
10 Gb/s 1310nm SFP+ 40 km Transceiver
SFPP-ATLP-31-20 SFP+ Plug-in, 10Gbps, 20km, TX=1310/RX wide, on two single mode fibers, LC/PC Blue
SFPP-ATLP-31-10 SFP+ Plug-in, 10Gbps, 10km, TX=1310/RX wide, on two single mode fibers, LC/PC Blue
SFPP-ATLP-31-02 10Gb/s 1310nm SFP+ 2 km Transceiver
SFPP-ATLP-51-40 10 Gb/s 1550 nm SFP+ 40 km Transceiver
SFPP-ATLP-51-100 10 Gb/s 1550 nm SFP+ 100 km Transceiver
SFPP-ATLP-51-80 10 Gb/s 1550 nm SFP+ 80 km Transceiver
SFPP-ATLP-85-03 10 Gb/s 850nm Multi-Mode SFP+ Transceiver
SFPP-LP-T99R-80 10 Gb/s Tunable DWDM SFP+ 80 km Transceiver
SFPP-ATLP-DXX-80 10 Gb/s DWDM SFP+ 80 km Transceiver
SFPP-ATLP-DXX-40 SFP+ Plug-in, 10Gbps, 40km, TX=ITU Ch xx (17 to 61) /RX wide, on two single mode fibers, LC/PC Blue
SFPP-ATLP-CXX-80 SFP+ Plug-in, 10 Gbps, 80 km, TX = CWDM Ch xx (1470 nm to 1610 nm)/RX wide, on two single-mode fibers, LC/PC Blue.
SFPP-AT-LP-XXXX-60D 10 Gb/s BIDI SFP+ 60 km Transceiver
SFPP-ATLP-CXX-40 SFP+ Plug-in, 10Gbps, 40km, TX=CWDM Ch xx (1270 nm to 1610 nm) /RX wide, on two single mode fibers, LC/PC Blue
SFPP-ATLP-CXX-10 SFP+ Plug-in, 10 Gbps, 10 km, TX=CWDM Ch xx (1270 nm to 1610 nm)/RX wide, on two single-mode fibers, LC/PC Blue
SFPP-AT-LP-XXXX-40 SFP+ Plug-in, 10Gbps, 40km, TX=1270/RX=1330 , on one single mode fibers, LC/PC Blue
SFPP-LP-XXXX-10 SFP+ Plug-in, 10Gbps, 10km, TX=1270/RX=1330 , on one single mode fibers, LC/PC Blue
XFP 10 Gb/s BIDI Single-Mode 40 km Transceiver DDM
XFP 10 Gb/s BIDI Single-Mode 20 km Transceiver DDM
XFP 10 Gb/s BIDI Single-Mode 10 km Transceiver DDM
XFP-AT-LP-31-20 10 Gb/s 20 km XFP Transceiver
XFP-AT-LP-31-10 10 Gb/s 10 km XFP Transceiver
XFP-AT-LP-51-40 10 Gb/s 40 km XFP Optical Transceiver
XFP-AT-LP-51-80 10 Gb/s 80 km XFP Optical Transceiver
XFP-ATLP-XXXX-60 10 Gb/s BIDI XFP 60 km Transceiver
SFPP-ATLP-61-80 SFP+ Plug-in, 10Gbps, 80km, TX=1610/RX wide, on two single mode fibers, LC/PC Blue
SFPP-AT-CO-03 10GBASE-T SFP+ Copper RJ45 30m Transceiver
SFPP-16-LP-85-01 16 Gb/s 850 nm SFP+ 100 m Transceiver
SFPP-A8LP-85-015 8.5 Gb/s 850 nm Multi-Mode SFP+ Transceiver
SFPP-A6-LP-31-02 6.25 Gb/s Single-Mode SFP+ Transceiver
SFPP-A6-LP-85-03 6.25 Gb/s 850 nm Multi-Mode SFP+ Transceiver
Get in touch with our experts
Feedback