Ascent’s comprehensive BTS monitoring solution manages site power and environmental impact using latest IOT technology. It combines power and environmental monitoring, ensures power supply/security, reduces site visits, and reduces OPEX. With efficient monitoring and optimization, operators can enhance their power consumption efficiency, avoid expensive system shutdowns, and reduces theft for remote sites.
• RS‑485 MODBUS RTU interface for generator and ATS monitoring and control.
• Monitors all generator controller parameters (oil pressure, temperature, battery voltage etc.)
• Measures AC voltage, current, frequency, and status for generator and grid.
• Configurable alarm generation for all measured parameters and monitored states.
• Automatic and manual control for external ATS switch.
• Monitors HVAC, UPS, Site Security.
• Remote management via SNMP.
SNMP Management Interface
• Connection by socket TCP/IP management protocol.
• Remote configuration update by TCP/IP or local via USB, IP.
• Configuration reset function (Reset to default configuration and/or firmware).
• Nonvolatile parameter configuration.
• Password protection for parameter settings.
• NOC notification of configuration changes.
• Stores up to 1000 events with automatic deletion of oldest events when full.
• Measurement updates < 10 seconds (configurable for maximum performance).
• Notification updates < 1 second.
AC Power Main and Generator Monitoring and Control
• Monitors all generator controller parameters (oil pressure, temperature, battery voltage etc.).
• Measures AC voltage, current, frequency and status for generator and grid.
• Calculate and log power consumption from grid and generator.
• Support for single and 3 phase sources 0‑260 VAC rms.
• Automatic and manual control for external ATS switch, monitoring of ATS status.
• Generator accumulated operational time with configurable maintenance notifications.
Uninterruptable Power Supply Monitoring and Control
• Monitoring and control of UPS through MODBUS RTU or TCP.
• Monitor battery voltages and battery bank charge and discharge current.
HVAC Monitoring and Control
• Monitor and control of 2 HVAC units, 1 ventilation (free cooling) unit.
• Monitoring and control of HVAC units through MODBUS RTU or TCP/IP.
• HVAC enable/disable contactor control.
• Monitors shelter temperature, outside temperature, HVAC output temperature.
• Monitors HVAC power consumption.
• Site Security and Miscellaneous Monitoring and Control
• 12 digital GPIO ports can be configured for monitoring door closures, motion detectors, smoke detectors etc. Control of door locks, alarms etc. can also be configured.
• 12 analog GPIO ports can be configured for analog monitoring.
Get in touch with our experts
Feedback