ACT AE200 P2P CPE is a series of high performance optical residential gateways designed to deliver high-speed internet connections, VoIP, IPTV, and traditional CATV services. AE200 provides network operators and services providers with the powerful residential gateway equipment needed to provide advanced services in Fibre to The Home/Business (FTTH and FTTB) networks.
• P2P wireless residential gateway for P2P active Ethernet FTTH applications
• Delivers high-speed internet, VoIP, and IPTV and traditional CATV services
• 4 or 8 ports 10/100 or 1000 Mbps, 2 ports VoIP FXS and 1 port 100 Mbps or 1000 Mbps uplink VoIP residential gateway with built-in IEEE 802.11b/g/n WiFi module
• NAT/bridge hybrid mode to intelligently prioritize transported video/voice/data traffic
• Optimizes service performance as well as utilization of limited IP resources for service providers
• Flexible auto provision schemes reduce the OPEX of device maintenance for service providers
• SNMP power down trap to rapidly identify network fault due to power outage and reduce truck rolls
• Built- in cable tray for friendly fiber management in FTTH deployment
• FCC Class A, CE
AE200S Wireless P2P FTTx Residential Gateway
Hardware Parameters
Item | Description |
Chipset | BCM68380 Series |
Optical Type | SC/APC SC single-mode/single-fiber, symmetric 1.25 Gbps |
Wavelength | Tx 1310 nm, Rx 1490 nm CATV 1550 nm |
Optical Power | Tx power -9 dBm to -2 dBm Rx sensitivity -22 dBm CATV -8 dBm to +2 dBm |
Interface Type | 4 × 10/100/1000 Mbps Auto adaptive Ethernet interfaces, Full/Half Duplex, RJ45 connector 2 POTS, RJ11 connector 1 SCTE F connector |
Wireless | Compliant with IEEE 802.11b/g/n, 300 Mbps, 2T2R 2 internal antennas |
CATV | RF Video Output Bandwidth (MHz):45~875 RF Output Level(dBuV):80 AGC Dynamic Range(dBm):-6~+2 |
Indicators | 12, For POWER, system, LINK, WiFi, Phone, LAN, Pair, CATV |
Software Parameters
Item | Description |
LAN | Supports port rate limiting Supports loop detection |
VLAN | Supports VLAN tag mode Supports VLAN transparent mode Supports VLAN trunk mode Supports VLAN translation mode Supports VLAN QinQ mode |
Multicast | Supports IGMP v1/v2/v3 Supports IGMP proxy and MLD proxy Supports IGMP snooping and MLD snooping |
QoS | Supports 4 queues Supports SP and WRR Supports 802.1P Supports DSCP |
L3 | Supports IPv4, IPv6 and IPv4/IPv6 dual stack Supports DHCP/PPPOE/Statics Supports static route Supports NAT Supports bridge, route, route and bridge mixed mode Supports DMZ Supports DNS Supports ALG Supports UPnP Supports virtual server |
DHCP | Supports DHCP server |
VOIP | Supports SIP protocol Supports voice coding: ITU-T G.711/G.723/G.726/G.729, auto-negotiate with call agent Supports Echo cancellation exceeding ITU-T G.165/G.168-2002, up to 128 ms tail length Supports high/low speed fax/Modem, bypass fax, and T38 fax Supports InBand / RFC2833/SIP INFO, MD5 authentication, call forward, call waiting, hot-line call, and all kinds of value-added voice service. Multi-party conferencing Supports Line testing according to GR-909 |
Wireless | Supports 802.11b/g/n and Mixed mode Supports 4 SSID Supports No-auth, WEP, WPA-PSK and WPA2-PSK function with AES, TKIP encryption |
Performance | Data loss: <1*10E-12 Call loss: <0.01% |
Security | Supports Firewall Supports Mac filter Supports ACL Supports URL filter |
Management | Supports WEB Supports TR069 Supports TELNET Supports CLI |
AE8000 P2P Core Switch Platform
ASR2900 Multiservice Switching Router
AS3400 High-Density 10G Routing Switch
AS3200 10 Gigabit Layer 3 Switch
Multiservice 10GE Switches
AS2400 Multiservice 10GE Ethernet Switch
AS2300 Series Multiservice Gigabit Ethernet Switch (w/ PoE)
AS220
AS2108 Switch
AS1200 Plug & Play PoE Switch
Gigabit SFP Fiber Switch with POE
AS200 Fiber Switch
AE200 P2P Customer Premise Equipment
Get in touch with our experts
Feedback