Ascent Communication Technology

AON1200D Optical Receiver

Ascent’s AON1200D outdoor optical receiver is our latest 1GHz dual-way switch optical receiver. With wide range receiving optical power, high output level, low power consumption. It is the ideal equipment to build the high-performance NGB network. This product adopt advanced optical AGC control range from +2dBm to -9/-8/-7dBm adjustable. EQ and ATT both use the professional electric contrl circuit, make the control more accurate and operation more convenient. Built-in the Ethernet transponder, support remote network management (optional) It is part of ACT Deep Fiber solution, which has been designed to deliver high quality CATV and other advanced services. The cost-effective node platform with compact structure and convenient installation helps operators expand bandwidth of their existing HFC network while minimizing capital investment. AON1200D node provides the web management interface to support the remote monitoring capability in advanced network management system.

• Adopt advanced optical AGC technique, optical AGC control range: +2dBm to -9/-8/-7dBm adjustable

• Two-Way optical signal received, back up each other, arbitrarily set the auto-switching conditions and can also be set to manual switch

• Forward working frequency extended to 1GHz, RF amplifier part adopts the high performance low power consumption GaAs chip, the maximum output level up to 116dBμV

• EQ and ATT both use the professional electric control circuit, make the control more accurate, operation more convenient

• Built-in the Ethernet transponder, support remote network management (optional)

• With compact structure, convenient installation, it is the first choice equipment of FTTB CATV network

• Built-in high reliability low power consumption power supply

Technique Parameters

Item	Unit	Technical Parameters
Optical Parameters
Receiving Optical Power	dBm	-9 to +2
Optical AGC Control Range	dBm	+2 to -9/-8/-7(adjustable)
Optical Return Loss	dB	>45
Optical Receiving Wavelength	NM	1100 to 1600
Optical Connector Type		SC/APC or specified by the user
Fiber Type		Single mode
Link Parameters
C/N	dB	≥ 51	EQ 8dB, Output level 108 dBμV (FZ110)
C/CTB	dB	≥ 67
C/CSO	dB	≥ 62
RF Parameters
Frequency Range	MHz	45 ~862/1003
Flatness In Band	dB	±0.75
Rated Output Level	dBμV	≥ 108
Max Output Level	dBμV	≥ 112 (-9 to +2dBm Optical power receiving)
		≥ 116 (-7 to +2dBm Optical power receiving)
Output Return Loss	dB	≥16
Output Impedance	Ω	75
Electrical Control EQ Range	dB	0 to 15
Electrical Control ATT Range	dB	0 to 15
General Characteristics
Power Voltage	V	A: AC (150 to 265) V B: AC (35 to 90) V
Operating Temperature	°C	-40 to 60
Consumption	VA	≤14
Dimension	mm	235 (L) × 150 (W) × 108 (H)