
Ascent’s SFP28 32GBase-SR Transceiver is intended for 100m reach service 28.05Gb/s 850nm Multi-mode high-speed communications equipment where low-cost, extraordinary performance and reliability are essential. It consumes low power, operates base on 3.3V DC power supply and is offered in the commercial temperature range via an LC duplex connector. They are compliant with SFP+ MSA, SFF-8431 and SFF-8432. High speed electrical and optical specifications are compliant with ANSI Fibre Channel FC-PI-6. Digital diagnostics functions are available via a 2-wire common management interface, to allow access to real-time operating parameters. With these features, this easy-to-install, hot-swappable transceiver is suitable for fiber communications application up to 32G. The FC transceiver is applied to Storage Area Networking in Data Centers, Data Center Fiber Channel Interconnections over Backbone, Enterprise Network SAN Interconnections, etc.
· Support DDM (Digital diagnostic) comparetible with SFF-8472
· CDR integrated
· Compatible with SFF-8024, SFF-8431, SFF-8432
· Compatible with IEEE802.3by
· Application: Infiniband EDR application; 32G Fiber Channel application
· 32GFC(28.05Gb/s) serial optical interface
· 850nm VCSEL transmitter
· GaAs PIN PD receiver
· Low power consumption <1W
· Maximum link length of 100m via OM4 multimode Fiber (MMF)
· Fibre Channel FC-PI-6 compliant
· RoHS compliant
Absolute Maximum Ratings
Parameter | Symbol | Min. | Typ. | Max. | Unit |
Storage Temperature | Ts | -40 | 85 | °C | |
Relative Humidity | RH | 0 | 85 | % |
Parameter | Symbol | Min. | Typ. | Max | Unit |
Case Temperature | Tc | 0 | +70 | °C | |
Power Supply Voltage | Vcc | 3.15 | 3.30 | 3.45 | V |
Signaling Rate each Channel | BR | 28.05 | Gbps |
Optical Characteristics (T=25°C, unless noted)
Parameter | Symbol | Min. | Typ. | Max | Unit |
Transmitter | |||||
Center Wavelength | λ | 840 | 860 | nm | |
RMS Spectral Width | Pm | 0.6 | nm | ||
Average Pptical Power | Pavg | -8.4 | 2.4 | dBm | |
Optical Modulation Amplitude | OMA | -6.4 | 3 | dBm | |
Average Launch Power of OFF Transmitter | Poff | -30 | dBm | ||
Extinction Ratio | ER | 2 | dB | ||
Optical Return Loss Tolerance | 12 | dB | |||
Receiver | |||||
Center Wavelength | λ | 840 | 850 | 860 | nm |
Damage Threshold | 3.4 | dBm | |||
Receive Power Overload | 2.4 | dBm | |||
Receiver Reflectance | -12 | dB | |||
Receiver Sensitivity | SENS | -10 | dBm | ||
LOS Assert | LOSA | -30 | dBm | ||
LOS De-Assert | LOSD | -13 | dBm | ||
LOS Hysteresis | LOSH | 0.5 | dB |
Electrical Characteristics
Parameter | Symbol | Min. | Typ. | Max. | Unit |
Power Consumption | 1 | W | |||
Supply Current | Icc | 300 | mA |



64 Gb/s SFP56 SW Fibre Channel 850nm Transceiver

40 Gb/s QSFP+ ER4 40 km Transceiver

40 Gb/s QSFP+ ER4 40 km Transceiver

40 Gb/s QSFP+ LR4 10 km Transceiver

QSFP-AQ-LP-W4-10 40 Gb/s QSFP LR4 10 km Transceiver

40 Gb/s QSFP+ PSM4 Transceiver 2km

QSFP-AQ-MP-31-10 40 Gb/s QSFP+ PSM 1310nm 10km MPO Optical Transceiver

40 Gb/s 300m QSFP+ CSR4 Transceiver

40G QSFP+ UNIV MMF/SMF 150m/2km

40G QSFP+ CWDM 2 km

QSFP-AQ-LP-W4-20 40 Gb/s QSFP CWDM 20 km Transceiver

QSFP-AQ-MP-85-03 40 Gb/s 850 nm QSFP+ 300 m Transceiver

QSFP-AQ-MP-85-01 QSFP+ 40Gb/s SR4 MPO Transceiver

40 Gb/s QSFP+ BiDi Transceiver 150m
.png)
25 Gb/s CWDM EML SFP28 10 km Transceiver

25 Gbps 1310 nm 80 km SFP28 ZR Transceiver

25 Gb/s 1310 nm Single-Mode SFP28 Transceiver

SFP28-25LP-31-10 25 Gb/s 1310 nm Single-Mode SFP+ Transceiver

25 Gb/s 850 nm Multi-Mode SFP28 300m Transceiver

SFP28-25LP-85-01 28 Gb/s 850 nm Multi-Mode SFP28 Transceiver

10/25 Gb/s SFP28 1310 nm 40km Transceiver

10/25 Gb/s SFP28 1310 nm 10km DDM Transceiver

10/25 Gb/s SFP28 850 nm 300m Transceiver

10/25 Gb/s SFP28 850 nm 100m Transceiver
Get in touch with our experts
Feedback