ACT AS2428S Series Optical Fiber 10GE Switch is a high-performance L2 switch which provides network operators and service providers with a cost-effective access layer for Fast Ethernet P2P services in Fiber to The Home/Business (FTTH & FTTB) networks.
• 16 gigabit SFP ports, 8 gigabit TX/SFP combo ports, and 4 10GE ports
• High-performance ASIC switch chip
• Supports 64K MAC
• Based on HPS (Hitless Protection System) for seamless switching
• Supports STP/RSTP/MSTP protocols, VRRP protocol, Ethernet ring protection, dual uplink primary and secondary link protection, and LACP link aggregation
• Supports ISSU (In-Service Software Upgrade)
• Supports an ultra-high BFD dual-directional link detection mechanism
• Supports Ethernet OAM mechanism, 802.3ah, 802.1ag, and ITU-Y.1731
• Supports complete layer-2 routing protocols
• Supports IPv6 protocol suite, IPv6 neighbor discovery, ICMPv6, path MTU discovery, DHCPv6, etc.
• Intelligent power supply management system
• Intelligent fan management system
• Complies with IEEE 802.3az
Item | Description |
Backplane | 256 Gbps |
Forwarding | 168 Mpps |
MAC | 32K/64K |
Ports | 16 × gigabit SFP ports 8 × gigabit TX/SFP combo ports 4 × 10GE optical ports |
Dimensions (W×H×D) | 440 mm × 280 mm × 44 mm |
Power supply | AC: 100V‑240V, 50Hz±10% Optional dual power supply |
Operating Temperature | 0 °C to +50 °C |
Storage Temperature | 10 % to 90 % RH (non‑condensing) |
Operating Humidity | ‑20 °C to +70 °C |
Storage Humidity | 5 % to 95 % RH (non‑condensing) |
MAC exchange | Static configuration and dynamic MAC learning MAC browsing and removal Configurable aging time of the MAC address Limited number of learnable MAC addresses MAC filtration Black‑hole MAC list |
VLAN | 4K VLAN GVRP 1:1 VLAN mapping and N:1 VLAN mapping QinQ and flexible QinQ Private VLAN |
STP | 802.1D (STP), 802.1W (RSTP) and 802.1S (MSTP) BPDU protection, root protection, and loopback protection |
Multicast | IGMP v1/v2/v3 IGMP Snooping IGMP Fast Leave Multicast group strategy and quantity limitation Multicast flow copying over VLANs PIM‑SM, PIM‑DM |
IPv4 | Static routing, RIP v1/v2, OSPF, BGP Strategy routing Load balance by equivalent routing BFD for OSPF, BGP |
IPv6 | ICMPv6, DHCPv6, ACLv6 and IPv6 Telnet IPv6 neighbor discovery Path MTU discovery MLD V1/V2 MLD Snooping IPv6 static routing, RIPng, OSPFv3, BGP4+ Manual tunnel, ISATAP tunnel, 6 to 4 tunnel |
MCE | MCE |
MPLS VPN | LDP protocol MCE MPLS VPN supported P/PE MPLS TE MPLS OAM |
QoS | Flow classification based on L2/L3/L4 protocols CAR flow limit 802.1P/DSCP priority re‑labeling SP, WRR and “SP+WRR” Congestion avoidance mechanisms like Tail‑Drop and WRED Flow monitoring and flow shaping |
Security | L2/L3/L4 ACL flow identification and filtration DDoS attack prevention, TCP’s SYN Flood attack prevention, UDP Flood attack prevention, etc Broadcast/multicast/unknown unicast storm‑control Port isolation Port security, and “IP+MAC+port” binding DHCP snooping and DHCP option 82 IEEE 802.1x authentication Radius BDTacacs+ authentication uRPF Level‑based command line protection |
Reliability | Power supply 1+1 backup Static/LACP link aggregation; link aggregation of across‑service cards EAPS VRRP GR for OSPF and BGP BFD for OSPF and BGP ISSU uninterrupted system upgrade |
Management | Console, Telnet, SSH2.0 Browser‑based WEB management SNMP v1/v2/v3 TFTP file upload and download RMON sFLOW |
Environment protection | IEEE802.3az environment protection Ethernet |
AE8000 P2P Core Switch Platform
ASR2900 Multiservice Switching Router
AS3400 High-Density 10G Routing Switch
AS3200 10 Gigabit Layer 3 Switch
AS2400 Multiservice 10GE Ethernet Switch
AS2300 Series Multiservice Gigabit Ethernet Switch (w/ PoE)
AS220
AS2108 Switch
AS1200 Plug & Play PoE Switch
AS200 Fiber Switch
AE200S P2P Customer Premise Equipment
AE200 P2P Customer Premise Equipment
Get in touch with our experts
Feedback