AMC210 Series Fast Ethernet Media Converter is an economical series of high-performance converters that comply with IEEE 802.3 standards. AMC200 GE converters transforms the transmission media of Ethernet signal from CAT5 to optical fiber. It can extend the transmission distance from a few hundred meters to hundred kilometers.
• Complies with IEEE 802.3 10 Base-T standard.
• Complies with IEEE 802.3u 10/100 Base-TX/FX standard
• Complies with IEEE 802.3X standard
• 10/100/ Mbps port with full/half duplex auto-negotiation
• Back pressure flow control for full duplex
• Twisted-pair connector: NODE/HUB or SWITCH (5 class UTP)
• Back pressure flow control for full/half duplex IEEE802.3X
• Automatic identification of MDI/MDI-X cross-line
• High-performance 155 Mbps memory bandwidth
• Complies with FCC, 15 CLASS A, RoHS, and CE MARK
Description | |
Standard Protocol | IEEE802.3 10 Base‑T standard IEEE802.3u 10/100Base‑TX/FX standard IEEE 802.3d standard. IEEE 802.3Q standard. |
Bandwidth | RJ 45 Port: 10/100 Mbps Optical Port: 155Mbps |
Fiber Mode (SM, Duplex) | |
Tx 1310 nm, Rx 1310 nm | Tx Power: ‑13 dBm to ‑4 dBm Rx Sensitivity: ≤‑33 dBm |
Fiber Mode (SM, Simplex) | |
Tx 1550 nm, Rx 1310 nm Tx 1310 nm, Rx 1550 nm | Tx Power: ‑13 dBm to ‑4 dBm Rx Sensitivity: ≤‑33 dBm |
Operation Mode | Full / half duplex mode |
Connectors | UTP: RJ‑45 Fiber connector: SC/ST/FC |
Operation Mode | Full /Half duplex mode |
LED Indicators | POWER, FPL, 10/100, FRX, TRX, FDX. |
Power Supply | |
Internal | AC: 110 VAC to 250 VAC / 50 Hz DC: ‑48 VDC |
External | DC‑5V |
Power Consumption | ≤5W |
Environmental Parameters | |
Work Temperature | 0 °C to +55 °C |
Storage Temperature | ‑40 °C to +70 °C |
Humidity | 5 % to 90 % (non‑condensing) |
TP Cable | Cat5 UTP cable (max distance: up to 100 m) |
Fiber Cable | 8.3/125, 8.7/125, 9/125, 10/125 μm (max distance: 20 km to 120 km) 50/125, 62.5/125 μm (max distance: 2 km to 5 km) |
MTBF | 100,000 hours |
Dimensions (L × W × H) | 115 mm × 77 mm × 26 mm (card type without metal box) 94 mm × 70 mm × 25 mm (external power supply) 140 mm × 110 mm × 30 mm (internal power supply) |
Chassis Parameters
Item | Description |
No. of Slots | 16 |
Media Converters Adapted | 10M, 100M, 1000M, 10/100M, 10/100/1000M |
Power In | AC: 100 V to 260 V DC 48 V |
Power Out | DC 5V, 12A |
DC Plug Diameter | 2.5/5.5 mm |
Ripple | ≤50 mV |
Noise | ≤50 mV |
Protection of Power Supply
| Circuit breaker when overvoltage, circuit breaker when overflow, circuit breaker when short circuit |
Operating Temperature | 0 °C to +50 °C |
Storage Temperature | ‑20 °C to +85 °C |
Humidity | 5 % to 95 % |
Dimensions (L×W×H) | 485 mm × 231 mm × 90 mm 19 inches 2U |
