AON1110C Series Optical Receiver is part of ACT’s Deep Fiber solution, which has been designed to deliver high-quality CATV and other advanced services. This cost-effective compact mini receiver helps operators expand the bandwidth of their existing HFC network while minimizing capital investment. The AON1110C compact node has smart LED, SNMP, and Web GUI for convenient management and is suitable for MDU, FTTB or FTTC applications with high output up to 112 dBµV (AGC mode).
• Utilizes advanced optical AGC technique, optical AGC control range: -9 dBm to +2 dBm adjustable
• Redundant two-way optical signal input, can automatically switch according to the pre-set switching threshold, or manually forced switch
• Forward working frequency extended to 1 GHz, RF amplifier part adopts the high-performance low power consumption GaAs chip, maximum output level up to 112 dBμV
• EQ and ATT both use the professional electric control circuit, make the control more accurate, operation more convenient
• Built-in Ethernet transponder, support remote network management (optional)
• The optical output port and network management interface are external or internal (optional)
Description | |
Optical Parameters | |
Optical Receiving Power | ‑9 dBm to +2 dBm |
Optical Return Loss | >45 dB |
Optical Receiving Wavelength | 1100 nm to 1600 nm |
Optical Connector Type | SC/APC or specified by the user |
Fiber Type | Single‑mode fiber |
Link Performance | |
C/N1 | ≥51 dB |
C/CTB1 | ≥60 dB |
C/CSO1 | ≥60 dB |
RF Parameters | |
Frequency Range | 45 MHz to 862/1003 MHz |
Flatness in Band | ±0.75 dB |
Rated Output Level | 108 dBµV |
Max Output Level | ≥108 dBµV (‑9 dBm to +2 dBm optical power receiving) |
≥112 dBµV (‑7 dBm to +2 dBm optical power receiving) | |
Output Return Loss | ≥16 dB |
Output Impedance | 75 Ω |
Optical AGC Range | (‑9/‑8/‑7 dBm) to (+2 dBm) adjustable |
Electrical Control EQ Range | 0 dB to 15 dB |
Electrical Control ATT Range | 0 dB to 15 dB |
General Characteristics | |
Power Voltage | 150 VAC to 265 VAC |
Operating Temperature | ‑40 °C to +60 °C |
Consumption | ≤8 VA |
Dimensions (L×W×H) | 190 mm × 110 mm × 52 mm |
Note 1: Configure 59 PAL‑D analog channel signals at the 550 MHz frequency range. Transmit digital signal at the frequency range of 550 MHz to 862/1003 MHz. The digital signal level (in 8 MHz bandwidth) is 10 dB lower than analog signal carrier level. When the input optical power of the optical receiver is ‑1 dBm, the output level: 108 dBμV, EQ: 8 dB.
AON2400C 4-Port 2x2 Optical Node
AON2200C Optical Node
AON2100 Optical Node
AON212X Series Optical Node
AON121X Series Optical Node
AON1210C Optical Receiver
AON1200D Optical Receiver
AON1100E Optical Receiver
AON126S Mini Mode
AON121 Mini Node
AON120D Mini Node
ASR2500 Fiber Satellite CWDM Optical Receiver
AST2500 Fiber Satellite CWDM Optical Transmitter