AMC200 Series Gigabit Ethernet Media Converter is an economical series of high-performance converters that comply with IEEE 802.3 standards. AMC220 GE converters transforms the transmission media of Ethernet signal from CAT5 to optical fiber. It can extend the transmission distance from a few hundred meters to hundred kilometers.
• Supports IEEEE 802.3X frame flow control for full-duplex mode
• Store and forward mechanism
• Manual IP address setting/DHCP client for IP address assignment
• SNMP v1 / v2c monitor / private enterprise MIB
• Event trap and SNMP trap support
• Speed duplex mode configuration / flow control setting / bandwidth control on TP / fiber port
• Supports port status / Ethernet statistics on both TP and fiber interface
• Supports maximum frame size of 16 kB
• Loop detection / broadcast / multicast / unicast storm control
• Management VLAN / 16 IEEE 802.1Q VLAN groups / Q-in-Q VLAN
• 802.1p Tag Priority / IP address priority / IP DSCP option in
• Quality of Service mode and strict priority / Weighted Round Robin (WRR) QoS policies
• TS-1000 OAM / IEEE 802.3ah OAM / loop back test
• 16 TCP / UDP filter groups
• Password setting, IP setting and devices description setting through discovery utility
• Firmware upgrade via remote Web interface
• LED indicators for easy network diagnosing
• Reset Button at the front panel for the factory default reset
• Choice of fiber-connector from SC, LC, WDM, multi-mode / single-mode fiber /1000Base-SX / LX mini GBIC module
Item | Description |
Standards and Protocols | IEEE802.3x full duplex on 10BaseT, 100BaseTX, 1000BaseT IEEE802.3-2002 |
IEEE802.3u 100BaseTX IEEE802.3ab 1000BaseT IEEE802.3z 1000BaseX IEEE802.3ah-2004 | |
IEEE 802.1d Spanning Tree | |
IEEE 802.1w | |
IEEE 802.1p QoS | |
IEEE 802.1q VALN TAG IEEE802.3X flow control | |
Connector | ST, SC/UPC, FC, LC |
Operating Wavelength | Multi-mode: 850 nm, 1310 nm Single-mode: 1310 nm, 1490 nm, 1550 nm |
Optical Fibers | Multi-mode: 50/125, 62.5/125, 100/140 µm Single-mode: 8.3/125, 8.7/125, 9/125, 10/125 µm |
MAC Address | VLAN 4K |
Buffer Space | 128K |
Max RX Power | ≥ -3 dBm |
BER | ≤ 10^(-7) |
Serial Port Configuration | 9600 bps/8 bit/none parity/1 stop bit/none low control |
User Port | 10/100BaseTX or 10/100/1000BaseTX (RJ45), UTP, full/half duplex |
100Base-FX 1000Base-FX (SFP module optional) | |
Fiber Link Option | Dual fiber/single fiber (WDM) |
Max Frame Size | 1518 Bytes (100M); 9728 Bytes (1000M) |
Transmission Distance | Dual fiber: 20/40/60/80/100/120Km |
Single fiber: 20/40/60/80Km | |
Q-in-Q | Q-in-Q functionality |
IEEE802.3ah OAM | AMC220 Series has two working modes: Master and Slave. The central office device runs in Master mode, and customer premise devices run in Slave mode. OAM functions originated from the Master device. |
LED | Power: Indicate power supply; Fiber link/act: Blink when transmit/receive data; UTP link/act: Blink when transmit/receive data; Full/Half Duplex status: Indicate Half/Full duplex mode; TX connectivity: Indicate status of Ethernet link; FX connectivity: Indicate status of Fiber link |
Working Temperature | 0 °C to 50 °C (>16h temperature test at -5 °C and 55 °C ) |
Working Humidity | 5 % to 90 % RH (non-condensing); >4 days @ 93 % RH |
Storage Temperature | -20 °C to 70 °C |
Dimension | 94mm*70mm*25mm(L*W*H) (External power supply) |
Storage Humidity | 5 % to 90 % RH (non-condensing) |
Power Supply | 85 V AC to 265 V AC @ 50-60Hz Plug in/out ≥ 400 times (90s interval) Output Voltage uncertainty ±3% (without load); Continuous current ≥ 90% nominal current; ±5% nominal DC Voltage; Voltage surge protection Vpp ≤ 150mV |
Power Consumption | ≤5W |