AON2100 Series 2 port Node is part of ACT Deep Fiber solution, which helps operators expanding bandwidth of their existing HFC network while minimizing capital investment. The AON2100 Cabinet optical node is designed with two high outputs up to 112dBuV per port. Automatic Power Control (APC) maintains output level within a wide input range from -8 to +3dBm input.
• 870MHz/1002MHz RF Spectrum
• Compact housing and low power consumption
• 1 or 2 High output power (112dBuV) to eliminate last amplifier
• 2 forward receiver modules for redundancy and 1 return path transmitter
• 1 forward receiver and 2 return path segmentable transmitters
• High performance and cost effective deep fibre solution for FTTX, MDU, SMB applications
• FP or DFB return path transmitter suits set-top box systems where pay-per-view and other various return path information sent via RF
• Local test points and LED indicators on optical receivers, return transmitters
• Built-in fiber management tray to simplify installation and maintenance
• JXP pads for attenuation and equalization
• 10 Amperes continuous power passing
• Optional HMS transponders to support EMS management
AON2100 Deep Fibre 2 Port Optical Node
Downstream Specifications (Receiver) | |
Optical Wavelength | 1290 nm to 1600nm |
Optical Input Power | ‑8 dBm to +3 dBm (APC) |
RF Bandwidth | 54 MHz to 870/1002 MHz |
Reference Output Level | 2 × 112 dBmV, 60 ch PAL, 8 dB Slope, 3 % OMI |
RF Flatness | ±0.75 dB |
RF Return Loss | ≥16 dB up to 550 MHz, ≥14 dB up to 1000 MHz |
RF Input Impedance | 75 Ω |
RF Test Point | ‑20 dB |
Link Performance | |
CNR | 50 dB (60 ch PAL + QAM, ‑1 dBm receive) |
CTB | ‑65 dBc |
CSO | ‑63 dBc |
Upstream Specifications ( Optional Transmitter) | |
Optical Wavelength | 1310, 1550, CWDM |
RF Bandwidth | 5 MHz to 42 MHz, 5 MHz to 65 MHz |
Output Power | 3dBm ( RF input > threshold ) |
RF Input Level Threshold | ≥15 dBmV |
RF Flatness | ±0.75 dB |
RF Return Loss | 16 dB |
Optical Return Loss | 45 dB |
General Specifications | |
Optical Inputs | 2 auto‑switching |
Optical Outputs | 1 |
Optical Connector | SC/APC |
RF Outputs | 2 F Female |
Operating Temperature | ‑40 °C to +65 °C |
Storage Temperature | ‑40 °C to +85 °C |
Power Supply | 35 to 90 VAC (remote) or 135 to 270VAC |
Operating Relative Humidity | 5 % to 95 % RH (non‑condensing) |
Power Consumption | 50 W max with fully loaded module |
Dimensions (W × D × H) | 260 mm × 220 mm × 120 mm |
Weight | 1.0 kg |
Ship Weight | 1.5 kg |
AON2400C 4-Port 2x2 Optical Node
AON2200C Optical Node
AON212X Series Optical Node
AON121X Series Optical Node
AON1210C Optical Receiver
AON1200D Optical Receiver
AON1100E Optical Receiver
AON1110C Optical Receiver
AON126S Mini Mode
AON121 Mini Node
AON120D Mini Node
ASR2500 Fiber Satellite CWDM Optical Receiver
AST2500 Fiber Satellite CWDM Optical Transmitter