Ascent’s single-mode and multi-mode MPO/MTP® products are multi fiber connectors used in high-density backplane and Printed Circuit Board (PCB) applications in data and telecommunications system.
• 24-core MPO - 12xLC duplex multiple fiber assembly
• Single-mode & multi-mode available
• New miniature Breakout Module - saving space within patching management area the same time providing robust and safe transition between cable and tails
• Female MTP/MPO connectors for direct connection into QSFP + transceiver
• LSZH, OFNP, OFNR cable jacket types selection
• Rapid deployment Factory terminated modular system saves installation and reconfiguration time during moves, ads and changes
• Reliability 100 % tested - combination of high-quality components and manufacturing quality control guarantees product to the highest standards
• The fiber types are SM (G657A1), MM (OM3/OM4)
Fiber Transmission Performance
Multi‑mode | Single‑mode | ||||
Fiber Type | 62.5/125μm (850/1300nm) | 50/125μm (850/1300nm) | 50/125μm (850/1300nm) | 50/125μm (850/1300nm) | Single‑mode (1310/1383/1550nm) |
ISO/IEC name | OM1 | OM2 | OM3 | OM4 | OS2 |
Maximum Attenuation (dB/km) | 3.4/1.0 | 3.0/1.0 | 3.0/1.0 | 3.0/1.0 | 0.4/0.4/0.3* |
Maximum Attenuation (dB/km) | 3.4/1.0 | 3.0/1.0 | 3.0/1.0 | 3.0/1.0 | 0.65/0.65/0.5** |
Minimum Over Filled Launch (OFL) Bandwidth (MHx•km) | 200/500 | 700/500 | 1500/500 | 1500/500 | / |
Minimum Effective Modal Bandwidth (MHx•km) | 220 / ‑ | 950 / ‑ | 2000 / ‑ | 5350 / ‑ | / |
Characteristics
Multi‑mode (at 850/1300nm) | Single‑mode (at 1310/1550nm) | |||
MTP®/MPO Connector Insertion Loss | Typical 0.50 dB | Maximum 0.75 dB | Typical 0.45 dB | Maximum 0.55 dB |
MTP®/MPO Connector Reflectance | <25 dB | <35dB (8o angled polish) | ||
Durability | 500 rematings: < 0.50dB change | 500 rematings: < 0.45 dB change | ||
Operating Temperature1 | Outdoor cable: ‑40 °C to +70 °C Indoor cable: 0 °C to +70 °C | |||
Length | Length as defined in P/N, XX meters. Tolerance: < 5.0 meters +5/‑0 cm; ≥ 5.0 meters +20/‑0 cm Loose tube cables include a transition at one or both ends that is included in overall length. | |||
Note 1: Contact customer service representative to discuss exceptional environmental conditions
OSFP 800G ACC Cable
OSFP 800G DAC Cable
800G OSFP to 4x200G Breakout ACC
400G OSFP to 2x200G QSFP56 AOC Breakout Cable
400G QSFP DD AOC Breakout Cable
QSFP56 200G DAC Cable
QSFP28 100G AOC Cable
QSFP28 100G DAC Cable
QSFP AQ AOC 4G 10
QSFP+ 40G DAC Cable
QSFP+ 40G AOC Cable
QSFP AQ LP 31 10 MPO3
SFPP AT AOC Cable
100G to 25G Adapter
10G SFP+ Passive Copper Twinax Cable
QSFP CVR 10G